Fresh, unlinked wallets
Every campaign spins up new wallets funded through separate paths. No shared funding source, no wallet cluster that maps back to your deployer, no obvious bot signature on the chart.
Mainnet live · Chain ID 4663Robinhood
Robinhood
Volume Bot
Real volume. Fresh wallets. Zero keys.
Robinhood Chain went live on July 1, 2026 and memecoins took it over inside a week. This bot generates genuine on-chain trading volume for your token across Uniswap and every Robinhood Chain DEX — so your pair actually registers on DexScreener, DEXTools and every screener that sorts by activity.
- From 0.72 ETH
- No private keys
- Live in ~60s
- No subscription
Routes across the Robinhood Chain DEX and launchpad stack
The opportunity
Why volume decides who gets seen on Robinhood Chain
Robinhood Chain is an Arbitrum Orbit L2 that settles on Ethereum, uses ETH for gas and clears blocks in about 100ms. Uniswap, Lighter, 1inch and Arcus shipped on day one, and the chain crossed a billion dollars of DEX volume inside its first week.
That is the problem and the opportunity at once. Every aggregator that traders actually open — DexScreener, DEXTools, the chain's own sorted lists — ranks pairs by 24-hour volume, unique makers, transaction count and buy pressure. A token below those thresholds is not ranked badly. It is not shown at all.
$1B+DEX volume, first 7 daysto Jul 8, 2026
17M+transactions, first 7 daysto Jul 8, 2026
350Kunique wallets on chainfirst week
80%+of DEX activity is memecoinsJul 2026
Chain figures are public reporting from Robinhood Chain's first weeks of mainnet, shown with the date each was measured. They describe the network, not results from this tool.
How it works
Four steps, about sixty seconds
The bot lives entirely in Telegram. You never install anything, never connect a wallet and never expose a key.
- 01
Open the bot on Telegram
Tap through to @boostlegends_robinhood_bot. There is nothing to install, no account to create and no wallet to connect — the whole campaign is configured in chat.
- 02
Paste your token contract
Drop in the public contract address of your token on Robinhood Chain. The bot resolves your Uniswap pool, reads current liquidity and tells you what a campaign will realistically move.
- 03
Set volume, makers and duration
Choose your target volume, how many unique wallets should touch the pool and how long the campaign should run. Buy/sell ratio and pacing are yours to tune.
- 04
Fund in ETH and watch it run
Send ETH to the campaign address and the engine starts swapping. Every fill is a real transaction you can verify on the Robinhood Chain Blockscout explorer.
Under the hood
What separates a volume engine from a spam loop
Anyone can write a script that swaps back and forth from one wallet. It shows up as one wallet, and screeners discount it instantly. These are the parts that matter.
Randomised size and timing
Trade amounts, intervals and direction are drawn from a distribution rather than a loop. The resulting tape looks like a market, not a metronome.
Your keys stay yours
You never sign a transaction, connect a wallet, approve an allowance or hand over contract ownership. The only thing the bot needs is your public contract address.
Native to chain ID 4663
Routing, gas estimation and nonce handling are written for Robinhood Chain specifically — an Arbitrum Orbit L2 with roughly 100ms blocks — not ported from a Solana bot.
Maker count, not just volume
Aggregators weigh unique makers alongside raw volume. Campaigns are configured to grow both, because a million dollars from twelve wallets fools nobody.
Verifiable on Blockscout
Nothing is simulated. Each swap settles on Robinhood Chain and appears in Blockscout, your DEX aggregator listing and your pool's transaction history.
The toolkit
Every bot we run on Robinhood Chain
Volume is the core product. These are the campaigns built around it — all driven from the same Telegram bot.
hood.fun Volume Bot
Push bonding-curve coins toward migration.
OpenUniswap Volume Bot
Volume on the Uniswap AMM built for RH Chain.
OpenMarket Maker Bot
Two-sided quoting, tight spreads, real depth.
OpenTrending Bot
Hit DexScreener and DEXTools trending thresholds.
OpenHolder Booster
Grow unique holders and maker counts.
OpenBundler
Multi-wallet launch bundling on RH Chain.
OpenWho runs it
Built for every stage of a Robinhood Chain token
Fresh hood.fun migrations
A coin that just graduated its bonding curve into a Uniswap pool has liquidity but no tape. A short campaign gives it something to show in the first hour that matters.
Read moreChasing a trending slot
DexScreener and DEXTools rank on volume, makers, transaction count and buy pressure. A trending campaign targets those specific inputs during the window you pick.
Read moreEstablished RH Chain tokens
Volume decays. Recurring campaigns keep a maturing token visible in screener filters and sorted lists instead of sliding off page one.
Read morePre-listing momentum
Listings desks and aggregators look at sustained activity, not a single spike. Multi-day pacing builds a history rather than a candle.
Read morePricing
Pay for volume. Nothing else.
No monthly fee, no seat licence, no lock-in. You fund a campaign in ETH and that covers the swaps plus their gas.
100K volume
0.72 ETH
$100,000 generated · ~400 makers · 6 hours
First push after a hood.fun migration
200K volume
1.38 ETH
$200,000 generated · ~800 makers · 8 hours
Building a second day of activity
Most used300K volume
1.98 ETH
$300,000 generated · ~1,200 makers · 12 hours
Clearing DexScreener trending thresholds
400K volume
2.67 ETH
$400,000 generated · ~1,600 makers · 16 hours
Competing in a crowded launch window
500K volume
3.37 ETH
$500,000 generated · ~2,000 makers · 20 hours
Sustained multi-day visibility
700K volume
4.61 ETH
$700,000 generated · ~2,800 makers · 24 hours
Pre-listing momentum and launch desks
Learn the chain
Robinhood Chain, explained properly
What is Robinhood Chain?
Chain ID 4663, Arbitrum Orbit, ETH gas — the full primer.
Read guideHow to launch a token on Robinhood Chain
From launchpad to Uniswap pool to first trending push.
Read guideHow to trend on DexScreener (Robinhood Chain)
The metrics DexScreener actually ranks on, and how to hit them.
Read guideQuestions
Robinhood Volume Bot FAQ
What is a Robinhood volume bot?
A Robinhood volume bot is an automated trading tool that generates real on-chain trading volume for a token on Robinhood Chain. It executes buy and sell orders from many fresh, unlinked wallets against your token’s Uniswap pool, with randomised sizing and timing, so the resulting volume, transaction count and unique-maker count register on DEX aggregators like DexScreener and DEXTools.
What is Robinhood Chain?
Robinhood Chain is an Arbitrum Orbit Layer 2 that settles on Ethereum, launched to public mainnet on July 1, 2026 after a public testnet on February 10, 2026. It is 100% EVM-compatible, uses ETH as its gas token, runs roughly 100ms block times and carries chain ID 4663. Uniswap, Lighter, 1inch and Arcus were live from day one.
Is the Robinhood volume bot safe to use?
The bot never asks for your private keys, seed phrase or wallet connection. It trades from its own freshly generated wallets against your token’s public liquidity pool, so your treasury and deployer wallet are never exposed. Every trade is a real, verifiable swap you can inspect on the Robinhood Chain Blockscout explorer.
How much does the Robinhood volume bot cost?
Campaigns are priced by volume: 0.72 ETH for $100K, 1.38 ETH for $200K, 1.98 ETH for $300K, 2.67 ETH for $400K, 3.37 ETH for $500K and 4.61 ETH for $700K. Anything above that is quoted per configuration. You pay once per campaign plus the ETH gas your trades consume — there is no monthly subscription.
Which Robinhood Chain DEXs and launchpads are supported?
The bot routes through Uniswap’s Robinhood Chain AMM and supports tokens from the major RH Chain launchpads including hood.fun, LaunchHood, Memecoin.Fun, Flap, Bankr, Klik and trench.today. Any token with a live Uniswap pool on chain ID 4663 can be boosted.
How fast will I see results?
Volume begins appearing on-chain within a minute or two of starting a campaign, and DEX aggregators typically reflect it within one refresh cycle. Because Robinhood Chain settles blocks in roughly 100ms, fills are near-instant compared with slower L1s.
Do I need to give up my token’s contract or ownership?
No. You only paste your token’s public contract address. The bot needs nothing else — no ownership transfer, no contract changes, no allowance approvals from your wallet.
What gas token do I need on Robinhood Chain?
ETH. Robinhood Chain uses ETH as its native gas token, and USDG and USDe are the main stablecoins on the network. You fund a campaign in ETH and the bot covers per-swap gas from that balance.
Will a volume bot guarantee my token trends?
No honest tool can guarantee a trending slot. Aggregators weigh volume alongside unique makers, holder growth, liquidity depth and buy/sell ratio, and the bar moves with whatever else is launching that hour. A volume campaign reliably moves the metrics you control; it cannot promise a specific ranking.
Can I run campaigns on other chains too?
Yes. The same team runs volume bots for Solana, Ethereum, BSC and Base. This site and this bot are dedicated to Robinhood Chain so the routing, gas handling and DEX integrations are tuned specifically for chain ID 4663.
Start a campaign
Be early on Robinhood Chain
The chain is weeks old and the trending boards are still winnable. Paste a contract address, pick your volume, and the bot does the rest — no keys, no contract access, no subscription.
Need a hand first? Talk to a human at@boostlegends1